Banner-HPG-Product-Mild Steel MIG-TIG-STICK Alloys.jpg

Mild Steel MIG/TIG/Stick Alloys

Harris mild steel alloys are perfect for welding cold rolled steel in thicknesses from thin sheet metal to thick plate steel. Conforming to AWS 5.18, these products are subjected to rigid quality control throughout the manufacturing process with particular attention given to cleanliness, cast and helix, resulting in a superior finished product.

Welding Process:

TIG (GTAW)

E70S2303POP - 36" TIG ROD 3LB PKG

ER70S-2

Mild Steel Alloy

ER70S-2 GMAW (MIG)/GTAW (TIG) triple deoxidized mild steel wire for defect-free weld deposits when properly used on most carbon steels. Ideal for pipe welding and steels with rusty and dirty surfaces.

ER70S-3

Mild Steel Alloy

ER70S-3 GMAW (MIG)/GTAW (TIG) general purpose welding wire for single-pass steel fabrication of automotive structures, small trailers, roof joists, railcars, furniture and other types of mild steel.

ER70S-6 MS .030 X 2LB SPOOL

ER70S-6

Mild Steel Alloy

ER70S-6 GMAW (MIG)/GTAW (TIG) general purpose welding wire for multi-pass on mild steel that has rusty and/or dirty surfaces that not cleaned before welding. Contains more dexoidizers than ER70S-3.

ER80SB-2 MS 1/16 X 36 X 10LB PKG

ER80S-B2

Mild Steel Alloy

ER80S-B2 GMAW (MIG)/GTAW (TIG) for welding 1/2% Cr-1/2% Mo, 1%-Cr-1/2% Mo and 1-1/4% Cr-1/2% Mo steels for elevated temperatures and corrosive service, as well as joining dissimilar combinations of Cr-Mo and carbon steels.

Low Alloy CR-MO Wire ER80SD-2 MS .035 X 33LB SPOOL

ER80S-D2

Mild Steel Alloy

ER80S-D2 GMAW (MIG)/GTAW (TIG) with molybdenum and manganese for strength and silicon as a deoxidizer for porosity control when CO2 welding is used for single and multi-pass welding of a variety of carbon and low alloy steels.

ER90SB-3 MS 1/8 X 36 X 10LB PKG

ER90S-B3

Mild Steel Alloy

ER90S-B3 GMAW (MIG)/GTAW (TIG) for welding 2-1/4% Cr-1% Mo steels found in high temperature and high pressure piping and vessels and carbon steels-to- chrome-moly steels

W1060303POP 1/16" X 36" X 3LB TIG ROD

W1060 (RG-45)

Mild Steel Alloy

W1060 (RG45) GTAW (TIG) oxy-fuel solid copper-coated, low carbon steel rod provides good ductility and machinability for welding mild and low carbon steel, automotive repair parts and ornamental art.

RG-60 W1200 MS "BARE" 1/16 X 36 X 50LB PKG

W1200 (RG-60)

Mild Steel Alloy

W1200 (RG60) GTAW (TIG) oxy-fuel solid steel welding rod with high strength and a bright finish for welding mild and low carbon steel, power plant pipes and process piping.